topic Re: KD-32W800 Analogue in Android TV

KD-32W800 Analogue

Hemyock2024 — Fri, 29 Mar 2024 22:15:15 GMT

Recently purchased a KD 32 W800 i UK

On tuning the TV on antenna the fine tune analogue tuning option is greyed out and there is no option to tune analogue channels, only option is Freeview

Is there a way to enable analogue tuning?

Re: KD-32W800 Analogue

daveyh64 — Sat, 30 Mar 2024 04:41:27 GMT

The last analogue TV signal/ broadcast was switched off in the UK in 2012, all terrestrial TV

received via a conventional TV aerial / antenna is broadcast as digital.

Re: KD-32W800 Analogue

Hemyock2024 — Sat, 30 Mar 2024 09:23:54 GMT

I need to connect to an internal analogue RF system, hence I need to enable the analogue tuner

Re: KD-32W800 Analogue

daveyh64 — Sat, 30 Mar 2024 14:33:09 GMT

Perhaps you could explain your situation a bit better.

What is your internal RF system.

From memory when first setting up the TV you are asked whether to select Analogue or Digital.

Otherwise press the Quick Settings button on the remote control.

Select Settings on screen.

Select Channels & Inputs.

Select Channel Set Up.

Select Auto Tuning. (or Manual tuning)

From the next on screen menu select Analogue.

These are the options on my Sony TV XR-42A90K, your TV is a different model and

therefore may have a different menu set up bit the above may guide you in the correct direction.

Re: KD-32W800 Analogue

royabrown2 — Sun, 31 Mar 2024 16:58:58 GMT

@Hemyock2024

Here’s the manual for your TV, open at the page you need:-

https://helpguide.sony.net/tv/iaepm1/v1/en/2_2_6_analogue_manual_scan.html?hl=analog

Have your analogue RF system connected and operating, so the TV can find it.